Panerai Luminor 47mm Leather Strap 26/26 “Argus Orange” Soft

Description

About the Leather:  This deluxe orange Panerai strap is constructed of some of the softest leather of any strap on this site. It is unbelievably soft and pliable, and thus it is extraordinarily comfortable. The color of this exceptional strap is Hermès orange. It features a waxy finish that gives it a slight shine at certain angles. I have color matched the stitching to the strap, using a thin but sturdy minimalist thread. The strap design features a sewn-in vintage style pin buckle. The strap features on floating keeper and one fixed. Like all of my straps, this strap is 100% handmade and hand sewn.

This strap ships with a vintage pin buckle. The thin nature and smooth angles of the pin buckle work best with leather this soft. While pictured above on the PAM00372, this orange Panerai strap also works incredibly well with models like the PAM00127 with traditional green colored indications. As the stitching and main colors of the strap are fairly neutral, as a result it pairs well with PAM dials of all colors combinations.

Pictured above, you may see this unique strap on the Panerai Luminor PAM00372.  *Advisory: This strap is vulnerable to stains due to it’s light color and it’s suede-like finish.

Measurements:  This strap is 26/26, with a thickness of ~5mm.

What We Include:  Watch strap (top, bottom), one vintage style pin buckle, one wooden gift box.

To view more soft 26mm straps, click here.

—————————————

Additional Information:  For each Panerai model, I have a different design philosophy regarding straps. For the 47mm Luminor series case, as well as the Radiomir 1940 and the Submersible, my concept revolves around thickness and symmetry. When I create unique straps for the 47mm series cases, I take into account the overall thickness and temper of the leather that I am working with; more so than with Radiomir or even 44mm Luminor cases.

The 47mm Panerai case ships with a 26mm width strap, and there is no escaping the presence of such a case and strap combination. My designs for this case take into account several features of the 47mm cases including the arches, curves, angles, and degrees of slope of not just the case, but the buckle as well. Instead of step-in away from or trying to minimize the bulk of the case, my goal is to embrace it. To reflect this, I work with thick leathers and make the straps for this model a minimum of 5.0mm thick on average.

Additionally, I like the make the strap keepers nice and wide. I box stitch most 47mm Panerai straps for extra strength. On rare occasions, I may employ open ended stitching. 47mm Panerai custom straps tend to be 5.0mm thick or greater. I usually utilize vintage style stainless pin buckles that are sewn in place. These pin buckles work especially well for straps that are thicker. Vintage style Panerai pin buckles also allow for more narrow holes for the buckle. Whats more, for these 26mm wide straps I mostly employ thicker thread with a larger margin in the stitching. I adjust spacing between stitches to be slightly wider than on my 44mm or Radiomir straps.

The entire process is performed by hand without templates or machines of any sort. I use the absolute basic tools, the same tools that I used as a boot maker for nearly two decades. As a result of the hand made nature of these straps, no two are identical.