Panerai Luminor 44mm Strap 24/24 “Twentynine Palms”

Description

About the Leather:  I created this greenish beige 24mm Panerai strap 100% by hand and hand stitched it, as with all of my straps. This is a chrome tanned leather with a very soft temper and a consistent finish.  This soft Panerai strap wears very comfortably on the wrist. The color presents as an ash grey color with very light hints of green at some angles. The inner is the same tone as the surface. I utilized thick beige thread to maintain the color theme. This strap design features one fixed and one floating keeper.  In addition, the edges of the strap feature a super light crease.

This strap ships by default with a vintage style brushed stainless steel pin buckle.  Furthermore, the uniform color palette of this 24mm Panerai strap will match all 44mm PAMs regardless of dial or lume color. Pictured above, you may see this beige 24mm Panerai strap on the Panerai Luminor PAM00632. This soft strap is great on the wrist all day long. Finally, this strap is a welcomed addition for anyone looking to add some lighter colors to their strap collection.

Measurements:  This strap is 24/24, with a thickness of ~4.5mm.

What We Include:  Watch strap (top, bottom), sewn buckle, one wooden gift box.

If you wish to view more beige 24mm straps, please click here.

________

Additional Information:  The 44mm Panerai Luminor is the true workhorse of the Panerai lineup, and by far has the most potential for aftermarket strap creation.  While larger 47mm case models demand thicker straps, the 44mm Luminor case is more flexible and works with a variety of different strap thicknesses.  With that in mind, I make most of my 44mm case Panerai straps with thinner thread.  When I select the thread and spacing, I take into consideration the thickness and temper of the leather.

Most of my 24mm custom straps for 44mm Panerai models utilize a vintage Panerai style pin buckle. However, you will find that many straps in this section also have additional buckle options in the drop down menus above.  My general design philosophy for 24mm straps is dual keepers of generous width. I use box stitching, and a thickness or 3.5 to 5.5mm depending on leather temper.

Finally, all of my 24mm Panerai straps for 44mm cases are 24/24mm, without a taper.  The only tapered straps that I make are for Radiomir cases.  My design preferences for the 44mm Panerai case tend towards longer buckle sides and shorter bottom sides. Above all, the aim is to achieve as much balance as possible.  Additionally, the stitching margins will be thinner on my 24mm Panerai straps than they are on my 47mm Panerai straps.

I pride myself in each aftermarket Panerai strap that I produce and perform the entire process by hand without templates or machines of any sort.  Additionally, I use the absolute basic tools, the same tools that I used as a boot maker for nearly two decades.  In conclusion, as a result of the handmade nature of these straps, no two are identical.