Panerai Luminor 44mm Strap 24/24 “Gingerbread” Brown

Description

About the Leather:  I created this thick and cushy medium brown Panerai strap 100% by hand and hand stitched it, as with all of my straps.  For this project, I selected an oil tanned leather with a matte, uniform finish in the signature gingerbread cookie color.  This soft brown Panerai strap will easily conform to your wrist and is extremely comfortable to wear.  Design characteristics of this strap include unfinished edges, thick margins, simple circular buckle pin holes and a blunt tip. Additionally, the edges of the strap itself are very softly creased.

In addition, the inner is a lighter tone than the surface, allowing for contrasting edges. For the stitching, I utilized thick beige thread in a box stitched pattern. Additionally, this strap design features two floating keepers.  This strap ships by default with a vintage style brushed stainless pin buckle. Pictured above, you may see this 24mm medium brown Panerai strap on the Panerai Luminor PAM00632.  There is no telling how amazing this soft brown Panerai strap will look with sufficient wear and tear. Finally, this is a must have for those looking for a strap thick enough to match the lugs of their 44mm case.  **The strap in the photos above measures 84/144.

Measurements:  This strap is 24/24, with a thickness of ~5mm.

What We Include:  Watch strap (top, bottom), brushed vintage style buckle, one wooden box and paperwork.

If you wish to view more brown 24mm Panerai straps, please click here.

________

Additional Information:  The 44mm Panerai Luminor is the true workhorse of the Panerai lineup, and by far has the most potential for aftermarket strap creation.  While larger 47mm case models demand thicker straps, the 44mm Luminor case is more flexible and works with a variety of different strap thicknesses.  With that in mind, I make most of my 44mm case Panerai straps with thinner thread.  When I select the thread and spacing, I take into consideration the thickness and temper of the leather.

Most of my 24mm custom straps for 44mm Panerai models utilize a vintage Panerai style pin buckle. However, you will find that many straps in this section also have additional buckle options in the drop down menus above.  My general design philosophy for 24mm straps is dual keepers of generous width, box stitching, and a thickness or 3.5 to 5.5mm depending on leather temper.

Finally, all of my 24mm Panerai straps for 44mm cases are 24/24mm, without a taper.  The only tapered straps that I make are for Radiomir cases.  My design preferences for the 44mm Panerai case tend towards longer buckle sides and shorter bottom sides. Above all, the aim is to achieve as much balance as possible.  Additionally, the stitching margins will be thinner on my 24mm Panerai straps than they are on my 47mm Panerai straps.

I pride myself in each aftermarket Panerai strap that I produce and perform the entire process by hand without templates or machines of any sort.  I use the absolute basic tools, the same tools that I used as a boot maker for nearly two decades.  In conclusion, as a result of the handmade nature of these straps, no two are identical.