Panerai Luminor 44mm Strap 24/24 “Demonspawn” Red

Description

About the Leather:  This rugged handmade red Panerai strap is full of texture and character. Made from soft chrome-tanned leather that ranges in tone from deep crimson to red. This strap is extremely soft and comfortable on the wrist. A selected a blood red thread for the stitching. This handmade red Panerai strap features one floating keeper and one fixed.  The strap also showcases a soft crease along its edges.  Additionally, this strap features a line of stitching at the buckle.

The strap comes with a brushed stainless steel vintage-style flat steel pin buckle sewn in place (pictured). Additional buckle options are available from the drop down menu. The strap shown in the photos measures 125/80, but additional sizes are available in the drop-down menu. In addition, each strap is meticulously punched by hand to create the pin buckle holes. Finally, the images display this handcrafted red Panerai strap paired with the Panerai Luminor Base PAM00775.

**As with all straps on my site, this strap is available with a “no buckle” option that allows you to use your OEM buckle. If you wish to use your OEM buckle, please select “No Buckle” from the buckle drop down menu.

Measurements:  This strap is 24/24, with a thickness of ~3.9mm.

What We Include:  Watch strap (top, bottom), sewn buckle, one wooden gift box.

If you wish to view more soft 24mm straps, please click here.

*Video:  Youtube may default to 480p or lower resolution, so please be sure to set the video resolution to 1080p or 4K

________

Additional Information:  The 44mm Panerai Luminor is the true workhorse of the Panerai lineup, and by far has the most potential for aftermarket strap creation.  While larger 47mm case models demand thicker straps, the 44mm Luminor case is more flexible and works with a variety of different strap thicknesses.  With that in mind, I make most of my 44mm case Panerai straps with thinner thread.  When I select the thread and spacing, I take into consideration the thickness and temper of the leather.

Most of my 24mm custom straps for 44mm Panerai models utilize a vintage Panerai style pin buckle. However, you will find that many straps in this section also have additional buckle options in the drop down menus above.  My general design philosophy for 24mm straps is dual keepers of generous width, box stitching, and a thickness or 3.5 to 5.5mm depending on leather temper.

Finally, all of my 24mm Panerai straps for 44mm cases are 24/24mm, without a taper.  The only tapered straps that I make are for Radiomir cases.  My design preferences for the 44mm Panerai case tend towards longer buckle sides and shorter bottom sides. Above all, the aim is to achieve as much balance as possible.  Additionally, the stitching margins will be thinner on my 24mm Panerai straps than they are on my 47mm Panerai straps.

I pride myself in each aftermarket Panerai strap that I produce and perform the entire process by hand without templates or machines of any sort.  I use the absolute basic tools, the same tools that I used as a boot maker for nearly two decades.  In conclusion, as a result of the handmade nature of these straps, no two are identical.