Panerai Radiomir Strap 27/22 “Three Two Three” Light OEM

129$139$

Custom sizing is available for all straps. Please contact us if you wish to order a size that is not featured on the size selection drop down menu below.

Description

About the Leather:  Let us for a moment appreciate the proportions of the large bodied PAM00323 that inspired the creation of this strap series. The massive 47mm case which is 16.5mm thick demands a substantial strap to match. With this in mind, I created a strap that tapers in thickness from 7mm at the lugs to 4.5mm at the tip. This additional thickness creates a more natural transition from the case to the length of the strap.

For this thick Radiomir strap, I selected a semi-waxy latigo leather with a soft temper and a consistent finish. The color immediately evokes memories of the classic light tan color of vintage French Ammo cases that feels so at home on Panerai watches.

This Radiomir strap is designed to use your OEM trapezoidal buckle. For this reason, you may use the drop down menu to decide if you’d like a buckle included. The strap features a reinforced stitch line along the buckle area. The design allows for one floating keeper and one fixed. For this thick Radiomir strap, I selected an Ivory toned thread for all of the hand stitching.

In addition to the details mentioned above, the strap features a soft crease along the edges. In consideration of the larger 47mm Radiomir cases, the width of this strap is 27mm, and tapers to 22mm at the buckle side. This strap will also seamlessly fit 45mm Radiomir cases without issue. The strap is pictured above on the PAM00323 Radiomir 10 Days. The strap in the photos measures 125/80.

Measurements:  This strap is 27/22, with a thickness of 7mm at the lugs and 4.5mm at the tip.

Included:  Watch strap, buckle (optional), one wooden gift box.

If you wish to browse more soft Radiomir straps, click here for additional options.

*Video PAM00992:  Youtube may default to 480p or lower resolution, so please be sure to set the video resolution to 1080p or 4K

*Demo PAM00292:

*Example PAM00323:

________

Additional Information:  For each Panerai watch, I have a different design philosophy when it comes to making straps.  The Radiomir is my historical favorite among all Panerai cases.  I bought my first Radiomir nearly two decades ago and did not start making straps for them until many years later when I neared retirement.  The Radiomir is a fun and challenging case to make custom straps for. 

On larger Panerai cases in the 47mm range, I tend to use thicker thread with wider spacing. For the Radiomir I employ a mixture of both thicker and thinner threads, and both tight and wide spacing.  When determining the thread thickness and spacing I take into account the characteristics of the leather.  As a general rule, I tend to make my custom aftermarket Radiomir straps in thicknesses ranging from 3.5 to 5.0mm. The average thickness will be somewhere in the middle.

Due to the wire lugs of the typical Panerai Radiomir case, I tend to lean towards leathers of a slightly softer and more pliable temper.  From a design perspective, I tend to utilize a taper of 27-22 or 26-22 depending on the leather.  If you have a larger 47mm Radiomir case I highly recommend going with straps of 4.5mm thickness or above.  I have even designed some custom aftermarket Radiomir straps specifically for the 47mm Radiomir cases that have a bolstered taper where the strap meets the case.

Please do not hesitate to contact me prior to the purchase of your custom Panerai Radiomir strap.  I would be happy to guide you on your journey towards the best bespoke strap for your individual needs. I pride myself in all aftermarket Panerai straps that I produce.  In addition, I complete the entire process by hand without templates or machines of any sort.  Futhermore, I use the absolute basic tools, the same tools that I used as a boot maker for nearly two decades.  Finally, as a result of the hand made nature of these straps, no two are identical.

Additional information

Size

Custom, 115/65 (Wrist 140-150mm), 125/75 (Wrist 165-178mm), 125/80 (Wrist 179-190mm), 130/80 (Wrist 179-190mm), 135/80 (Wrist 191-203mm), 140/85 (Wrist 204-216mm), 145/90 (Wrist 217-229mm)

Buckle Style

Bead Blasted DLC Black Buckle, Trapezoidal Brushed (Screw), Trapezoidal Polished (Screw), No Buckle

Reviews

There are no reviews yet.

Be the first to review “Panerai Radiomir Strap 27/22 “Three Two Three” Light OEM”