Panerai Luminor Due Strap for 42mm Crimson Red

Description

About the Leather: I selected for this project a thick oil tanned leather with a waxy finish.  I’ve intentionally made several Luminor Due straps with an exaggerated thickness. This was done to evoke the history of Panerai, while simultaneously blending in new materials and colors.  This strap features two keepers, one floating and one fixed.  For a sharp contrast, I chose a beige thread for the stitching. Additionally,  I have grouped the stitches closer together in consideration of the watch and strap size.  This crimson red Luminor due strap ships with a free polished trapezoidal buckle as seen in the pictures above.

While this strap was made with the ivory dialed PAM00906 in mind, and the stitching is color matched to the indications of that model, it would also look good on a PAM00741, or PAM01046.  I can also make this strap for smaller 38mm models if desired.

Measurements:  This strap is 22/22, with a thickness of ~5mm.

What We Include:  Watch strap (top, bottom), polished buckle, one wooden gift box as pictured.

If you would like to see more Luminor Due 42mm straps, please click here.

—————————————

Additional Information:

The 38mm, 42mm and 45mm Luminor Due series are the latest entries in the Panerai catalog. As with all Panerai cases, I take into consideration many elements of the watch before making a custom strap for it. With regard to the Due models, you will notice that my website features only straps for the 42mm models which have a 22mm lug width. I can happily make straps for your 38mm or 45mm Luminor Due model as well.

If you have a 45mm Luminor Due model, please check the 24mm strap section. When I make straps for the Luminor Due series, I take into consideration the much thinner case, and utilize leather of a lower thickness. This thinner leather sometimes allows for straps of a more rigid temper.

A variety of buckles may also be used on the 22mm straps, so you may see more than one buckle option on the drop down menus for various Panerai Luminor Due straps. Another unique feature that many of my custom Panerai Luminor Due straps utilize is quick release spring bars. Quick release bars work especially well on straps of a more firm temper. Quick release spring bars allow you to change straps with no tools and thus no chance of scratching the case. The slim and modern Due case lends itself to a wide variety of leathers that thicker cased Panerai models cannot pull off.

Please don’t hesitate to contact me if you have questions about any of my custom Panerai Luminor Due aftermarket straps. I pride myself in each aftermarket Panerai strap that I produce. I perform the entire process by hand without templates or machines of any sort. Additionally, I use traditional tools, the same tools that I used as a boot maker for nearly two decades. Finally, as a result of the hand made nature of these straps, no two are identical.