Panerai Leather Strap Luminor 26/26 Olive Canvas Aged (Sewn)

Description

About the Strap:  This is a custom, leather re-enforced green canvas Panerai strap with a distressed finish.  The color is consistent throughout and I have rolled the edges for durability.  Note that the finish on this strap feature cuts, tear, and other distress marks.  These are not imperfections, they are design features.  The stitching is beige in color and contrasts the green olive tone nicely while matching the beige colored indications on contemporary Panerai 47mm models.  This design features one floating keeper and one fixed keeper.  Included is one high grade aged vintage style pin buckle which is sewn in place.

I have aged the stainless buckle using an electro-chemical process, and is smooth to the touch.  While the buckle appears rusty, there is no rust and to risk to your skin.  The temper of this strap is medium-soft, and unlike most fine leather straps, this one can be used in the water without damaging the finish.  Pictured above, you may see this handmade green canvas Panerai strap on the Panerai Luminor PAM00372.

Measurements:  This strap is 26/26, with a thickness of ~4.5mm.

What we Include:  Watch strap (top, bottom), aged sewn buckle, one wooden gift box as pictured.

To view more green 26mm straps, click here.

—————————————

Additional Information:  For each Panerai model, I have a different design philosophy regarding straps. For the 47mm Luminor series case, as well as the Radiomir 1940 and the Submersible, my concept revolves around thickness and symmetry. When I create unique straps for the 47mm series cases, I take into account the overall thickness and temper of the leather that I am working with; more so than with Radiomir or even 44mm Luminor cases.

The 47mm Panerai case ships with a 26mm width strap. There is no escaping the mass of such a case and strap combination. My designs for this case take into account several features of the 47mm cases including the arches, curves, angles, and degrees of slope of not just the case, but the buckle as well. Instead of step-in away from or trying to minimize the bulk of the case, my goal is to embrace it. To reflect this, I work with thick leathers and make the straps for this model a minimum of 5.0mm thick on average.

Additionally, I like the make the strap keepers nice and wide. I box stitch most 47mm Panerai straps for extra strength. On rare occasions, I may employ open ended stitching. 47mm Panerai custom straps tend to be 5.0mm thick or greater. I usually utilize vintage style stainless pin buckles sewn in place. These pin buckles work especially well for straps that are thicker. Vintage style Panerai pin buckles also allow for more narrow holes for the buckle. Whats more, for these 26mm wide straps I mostly employ thicker thread with a larger margin in the stitching. I adjust spacing between stitches to be slightly wider than on my 44mm or Radiomir straps.

The entire process is performed by hand without templates or machines of any sort. I use the absolute basic tools, the same tools that I used as a boot maker for nearly two decades. As a result of the hand made nature of these straps, no two are identical.