Panerai Luminor 47mm Leather Strap 26/26 “Ash Grey” Soft

Description

About the Leather:  I created this soft ash grey Panerai strap 100% by hand, and hand stitched it as with all of my straps. This is a chrome tanned leather with a soft temper and an ash grey finish.  For this design, I kept the stitching tight and selected a charcoal toned thread.  Additionally, the design features one floating keeper, and one fixed. The sides of this strap are carefully hand burnished.

This strap ships by default with a vintage style stainless pin buckle that is sewn in place. Additional buckle options are available from the drop down menu. The sample strap in the photos above measures 125/80 for your reference.  Furthermore, I can make it in any size that you prefer.  Pictured above, you may see this ash grey Panerai strap with the Panerai Luminor PAM00372. This leather is particularly pliable which makes to very comfortable to wear.  This strap features a nice OEM style thickness.  Finally, this strap pairs especially well with brushed/titanium cases as well.

**As with all straps on my site, this strap is available with a “no buckle” option that allows you to use your OEM buckle. If you wish to use your OEM buckle, please select “No Buckle” from the buckle drop down menu.

Measurements:  This strap is 26/26, with a thickness of ~3.2mm.

What We Include:  Watch strap (top, bottom), one pin buckle, one wooden box with papers.

To view more soft 26mm Panerai straps, click here.

*Video:  Youtube may default to 480p or lower resolution, so please be sure to set the video resolution to 1080p or 4K

—————————————

Additional Information:  For each Panerai model, I have a different design philosophy regarding straps. For the 47mm Luminor series case, as well as the Radiomir 1940 and the Submersible, my concept revolves around thickness and symmetry. When I create unique straps for the 47mm series cases, I take into account the overall thickness and temper of the leather that I am working with; more so than with Radiomir or even 44mm Luminor cases.

The 47mm Panerai case ships with a 26mm width strap. There is no escaping the mass of such a case and strap combination. My designs for this case take into account several features of the 47mm cases including the arches, curves, angles, and degrees of slope of not just the case, but the buckle as well. Instead of step-in away from or trying to minimize the bulk of the case, my goal is to embrace it. To reflect this, I work with thick leathers and make the straps for this model a minimum of 5.0mm thick on average.

Additionally, I like the make the strap keepers nice and wide. I box stitch most 47mm Panerai straps for extra strength. On rare occasions, I may employ open ended stitching. 47mm Panerai custom straps tend to be 5.0mm thick or greater. I usually utilize vintage style stainless pin buckles that are sewn in place. These pin buckles work especially well for straps that are thicker. Vintage style Panerai pin buckles also allow for more narrow holes for the buckle. Whats more, for these 26mm wide straps I mostly employ thicker thread with a larger margin in the stitching. I adjust spacing between stitches to be slightly wider than on my 44mm or Radiomir straps.

I perform the entire process by hand without templates or machines and use the absolute basic tools, the same tools that I used as a boot maker for nearly two decades. Finally, as a result of the hand made nature of these straps, no two are identical.