Panerai Luminor 47mm Leather Strap 26/26 “Calabaza Orange” Soft

Description

About the Leather:  Crafted from exceptionally soft, premium leather, this thick orange Panerai strap is designed for ultimate comfort. Unbelievably pliable, it makes every wear a joy. Its waxy finish adds a subtle shine at certain angles, enhancing its refined appearance. The matching minimalist stitching ensures a sleek, cohesive look, while the vintage-style sewn-in pin buckle brings timeless elegance. Featuring one floating keeper and one fixed, this strap is meticulously handcrafted and hand-sewn for superior quality.

The edges of this Panerai strap feature a soft crease. With a thickness of ~5.2mm, this strap is substantial! Due to the thickness, it is advisable to go one size larger than usual for this strap. Perfectly designed for the large 47mm Luminor case, this vibrant thick orange Panerai strap pairs beautifully with models such as the PAM00372, as seen above. Thanks to its color matched stitching, it harmonizes effortlessly with a variety of PAM dial colors. Note that the color accuracy of the photos is better represent the true tones of this strap when compared to the video, which shows the color as more washed out.

Measurements:  This strap is 26/26, with a thickness of ~5.2mm.

Included:  Watch strap, one pin buckle, one wooden box with papers.

To view more  26mm Panerai straps, click here.

*Video:  Youtube may default to 480p or lower resolution, so please be sure to set the video resolution to 1080p or 4K

—————————————

Additional Information:  For each Panerai model, I have a different design philosophy regarding straps. For the 47mm Luminor series case, as well as the Radiomir 1940 and the Submersible, my concept revolves around thickness and symmetry. When I create unique straps for the 47mm series cases, I take into account the overall thickness and temper of the leather that I am working with; more so than with Radiomir or even 44mm Luminor cases.

The 47mm Panerai case ships with a 26mm width strap. There is no escaping the mass of such a case and strap combination. My designs for this case take into account several features of the 47mm cases including the arches, curves, angles, and degrees of slope of not just the case, but the buckle as well. Instead of step-in away from or trying to minimize the bulk of the case, my goal is to embrace it. To reflect this, I work with thick leathers and make the straps for this model a minimum of 5.0mm thick on average.

Additionally, I like the make the strap keepers nice and wide. I box stitch most 47mm Panerai straps for extra strength. On rare occasions, I may employ open ended stitching. 47mm Panerai custom straps tend to be 5.0mm thick or greater. I usually utilize vintage style stainless pin buckles that are sewn in place. These pin buckles work especially well for straps that are thicker. Vintage style Panerai pin buckles also allow for more narrow holes for the buckle. Whats more, for these 26mm wide straps I mostly employ thicker thread with a larger margin in the stitching. I adjust spacing between stitches to be slightly wider than on my 44mm or Radiomir straps.

I perform the entire process by hand without templates or machines and use the absolute basic tools, the same tools that I used as a boot maker for nearly two decades. Finally, as a result of the hand made nature of these straps, no two are identical.