Panerai Luminor 47mm Leather Strap 26/26 “B.Bison” Soft

Description

About the Leather:  I handcrafted this soft brown Panerai strap entirely by hand, just like all the straps available on my site. For this piece, I chose a chrome-tanned buffalo leather with a distinctive pebbled texture. This thick yet supple leather ensures all-day comfort, while its unique grain lends a rugged, one-of-a-kind appearance. For the stitching, I used an ivory white thread, hand-stitched in a boxed pattern. The edges have a subtle crease, and the sides of this soft brown Panerai strap have been carefully hand-burnished. This design also includes one floating keeper and one fixed.

By default, this strap comes with a mirror-polished pre-V style buckle, securely sewn in place. As shown in the images, this soft brown Panerai strap is fitted on the Panerai PAM00372 Luminor 3 Days 47mm. With brown leather, the case and dial pairing options are virtually limitless. The strap pictured measures 130/80. Buckle engravings are available upon request at no additional charge.

**As with all straps on my site, this strap is available with a “no buckle” option that allows you to use your OEM buckle. If you wish to use your OEM buckle, please select “No Buckle” from the buckle drop down menu.

Measurements:  This strap is 26/26, with a thickness of ~5.5mm.

Included:  Watch strap, one pin buckle, one wooden box with papers.

To view more brown 26mm Panerai straps, click here.

*Video:  Youtube may default to 480p or lower resolution, so please be sure to set the video resolution to 1080p or 4K

—————————————

Additional Information:  For each Panerai model, I have a different design philosophy regarding straps. For the 47mm Luminor series case, as well as the Radiomir 1940 and the Submersible, my concept revolves around thickness and symmetry. When I create unique straps for the 47mm series cases, I take into account the overall thickness and temper of the leather that I am working with; more so than with Radiomir or even 44mm Luminor cases.

The 47mm Panerai case ships with a 26mm width strap. There is no escaping the mass of such a case and strap combination. My designs for this case take into account several features of the 47mm cases including the arches, curves, angles, and degrees of slope of not just the case, but the buckle as well. Instead of step-in away from or trying to minimize the bulk of the case, my goal is to embrace it. To reflect this, I work with thick leathers and make the straps for this model a minimum of 5.0mm thick on average.

Additionally, I like the make the strap keepers nice and wide. I box stitch most 47mm Panerai straps for extra strength. On rare occasions, I may employ open ended stitching. 47mm Panerai custom straps tend to be 5.0mm thick or greater. I usually utilize vintage style stainless pin buckles that are sewn in place. These pin buckles work especially well for straps that are thicker. Vintage style Panerai pin buckles also allow for more narrow holes for the buckle. Whats more, for these 26mm wide straps I mostly employ thicker thread with a larger margin in the stitching. I adjust spacing between stitches to be slightly wider than on my 44mm or Radiomir straps.

I perform the entire process by hand without templates or machines and use the absolute basic tools, the same tools that I used as a boot maker for nearly two decades. Finally, as a result of the hand made nature of these straps, no two are identical.